NS胰岛素泵解决方案

发布时间：2015-10-18 19:46:37 来源：大电流电感厂家查看：次

Insulin pumps provide freedom and flexibility to those people who require a daily supplement of insulin to control their blood glucose levels. Todays insulin pumps are pager-sized devices worn on a belt that releases insulin periodically to the patient throughout the day, depending on the setting determined by the patient. Nationals small packaging and reliable, efficient power management meet the requirement these portable units have for operating over long periods of time without changing batteries.

Component Highlights

* DC/DC - High efficiency, keeps system power dissipation low, perfect for battery-powered devices.

* Microcontroller - RISC core with on-chip SRAM and Flash memory provides high computing ban模压电感dwid工字电感器th, and additional integration gives high I/O bandwidth and system expandability

1 Power

LP3883ES-1.2

LP3883ES-1.5

LP3883ES-1.8

2 Microcontroller

USB 1.1 Interface:

CP3UB17 - Reprogrammable Connectivity Processor with USB Interface

CP3UB26 - Reprogrammable Connectivity Processor with USB and CAN Interfaces

CAN 2.0B Active Interface:

CP3CN17 - Reprogrammable Connectivity Processor with CAN Interface

CP3CN23 - Reprogrammable Connectivity Processor with Dual CAN Interfaces

Bluetooth Baseband Processor:

NEW! CP3SP33 - Connectivity Processor with Cache, DSP, and Bluetooth, USB, and Dual CAN Interfaces

CP3BT10 - Reprogrammable Connectivity Processor wi电感器课件th Bluetooth and USB Interfaces

CP3BT13 - Reprogrammable Connectivity Processor with Bluetooth and塑封电感 CAN Interfaces

CP3BT23 - Reprogrammable Connectivity Processor with Bluetooth and Dual CAN Interfaces

CP3BT26 - Reprogrammable Connectivity Processor with Bluetooth, 绕行电感器USB, and CAN Interfaces

3 Audio Amp

LM4820ITP-6

LM4820ITPX-6

LM4864LD

4 LED Drivers

LM2623ALD

LM2623ALDX

LM2623AMM

更多医疗电子信息请关注：21ic医疗电子频道

平面变压器厂家 | 平面电感厂家

PFC控制芯片UCC28019好用吗？最近有一个案子，要用到大概1200W的PFC，想用一个相对比较简洁外围的控制芯片，看了一通，无非就是英飞凌或者TI的这款了，请用过这个芯片的朋友分享一下小心得，谢谢了

想来应

[DCDC]非隔离双向大功率dcdc，igbt过温，igbt损坏！如题，在实际应用中遇到了问题，双向dcdc工作参数先介绍下：正向，输入电压700V，输出电压280V到450V，输出电流200A。反向，输入电压350V到450V，输出电压380V到500V，输出电流170A。开关频率16kHz，igbt模块为（英飞凌FF300R12KS4）两个并联，冷却方式水冷。问题如下：（1），如果水冷散热器未加水，igbt能扛多久？会不会igbt温度没散出来，igbt就被

请问irf540 用什么管子驱动呢请问irf540 用什么管子驱动呢，我准备max628，用5V驱动行么？我看了一下irf540 的VGS=2-4V是不是电压越高驱动的时候，内阻越低，发热量越小啊。在负载不大的时候能不能用5V的max628去驱动呀。频率40k，占空比1/50,满意回复+5123654789 查看完整内容IR2110 IR2101 IR2103+5mmuuss586 查看完整内容用半桥驱动芯片，控制在12V左右比较合

上一条：OLED驱动器和模块设计在手机屏中的应用下一条：大功率LED照明电源设计方案